Commerce

N6-A

Sabec - N6 - Triple Chip Blade for Aluminum

7675 7675

45-R-S32

Royce//Ayr - S32-Plate Jointer Replacement Saw Blades

Industrial plate jointer saw blades. For biscuit joint machines.

14625

40-R-LUB

Royce//Ayr - Spray N Slide

Friction modifier for machine surfaces. Good for a vareity of machines to enable easier sliding of material on machine.

2597

45-R-S30

Royce//Ayr - S30M-Melamine Industrial Dado Sets

Industrial dado sets. Designed for producing grooves, dados and rabbeting on most wood based material. Negative hook angle helps avoid chipping in laminated material.

36065

58-R-584

Royce//Ayr - 584 Réducteur

Reducing bushings for use on saw blades. Bushings can be pressed into saws so they are permanent, or supplied seperate. If possible it is best to not have to use a bushing as this can add runout to the saw.

2880

S50

Royce//Ayr - S50 Cement Board

Industrial saws for cutting cement and composite
boards. Great for abrasive material that rapidly wears out
conventional carbide saws. PCD Diamond tips provide
superior wear resistance.

10267

57-R-S02

Royce/Ayr - S02 Universal

Industrial universal saw blades. For precision sawing of solid woods, plywood, and veneered panels.

9744 14435

57-R-S03

Royce/Ayr - S03 Laminated

Industrial laminated panel saw blade. Triple chip grind provides longer life when cutting laminated panels. Also works well on plastics

10555 15637

30-R-S06D

Royce//Ayr - S06 Scorings PCD

Adjustable scoring saw blades for sliding table saws. Two pc scoring saws with shims included to run on sliding table saws. Kerf of scoring unit can be adjusted by adding and
removing shims.

PCD Diamond: Polycrystalline diamond is a synthetic diamond made using extreme heat and pressure. PCD is incredibly hard, wear resistant, and has exceptional thermal capabilities. What this means for you is exceptional tool life when used in the proper applications.

51678 57420

57-R-S06

Royce//Ayr - S06 Scoring

Adjustable scoring saw blades for sliding table saws. 2 pc scoring saws with shims included to run on sliding table saws. kerf of scoring unit can be adjusted by adding and removing shims.

14343 21249

57-R-S10

Royce//Ayr - S10 Rip Saw

General saw blade for ripping soft and hard woods. Used on table, single line, and gang ripsaws.

5630 8340

57-R-S11

Royce//Ayr - S11 Rip Saw

Easy cut ripsaws for ripping wood in rough lumber applications. Suitable for high speed ripping in wet lumber applications.

7410 10978

57-R-S12

Royce/Ayr - S12 Glue Joint

Industrial rip saw blade for single line and gang rip saws. Impact resistant grade of carbide used to withstand demanding applications. Tooth design produce smooth finish for Glue Joints.

9333 13827

57-R-S14

Royce//Ayr - S14 Combination

Industrial saw blades for all around general purpose. Will rip and cross cut solid wood as well as cut panel materials.

9297 13773

57-R-S16

Royce//Ayr - S16 Mitre Joint

Industrial mitre joint saw blades. For smooth trim cuts on mitre saws. Good for mouldings, trim, picture frames and crown mouldings.

Ultima: For Industrial applications. Minimal run out in saws provide precise cuts. Unique sub micron chrome grade carbide for 20% more wear resistance over industrial Line saws. Large tips allow multiple sharpenings on saws.

5623 8330

57-R-S19

Royce//Ayr - S19 Nail Biter

Industrial nail biter saw blades. Designed for use in gas powered saws for demolition of buildings, or cutting up old pallets.

NOTE: Due to the rough nature these blades are used in, they are not guaranteed.

9333 13827

57-R-S29

Royce//Ayr - S29 Steel

Industrial metal cutting saw blades. Ideal for cutting ferrous metals on dry cut mitre saws. Good for cutting insulating foam boards with steel cladding.

NOTE: Due to the rough nature of these applications, tips are not guaranteed against breakeage. Max RPM 1700.

8998 13331

50-D-METAL

Dimar - Metal Saw Blades

Multi-purpose metal cutting saw blades are ideal for cutting ferrous metals (up to 25Hrc), aluminum, wood, and composite material.

8738 10922

57-S-D

Sabec - N6 - ATB Blade for Miter Saw

Thin kerf industrial saw blade for hardwood and softwood. The N6-D range is durable and offers precision cutting. This blade can be used on a table saw, miter saw or radial arm saw.

5234 7754

50-S-F

Sabec - N6 - Blade for Steel

Industrial saw blade for cutting mild steel. The N6-F range is durable and provides precise cutting. This blade can only be used on a metal-cutting miter saw.

13474