Commerce

R16

Royce//Ayr - R16 Veining Bit 1 Flute

3795

45-R37-513

Royce//Ayr - 2 Flute Straight Flute “V” Bottom

Good for carving and/or engraving in most materials.

5800

45-R38-513

Royce//Ayr - 2 Flute Ballnose Slow Helix

Good for carving, and or engraving in most materials.

5700

45-R52-024

Royce//Ayr - R52-024 Upcut (Aluminium & Hard Plastic) 2 Flute

Excellent for routing in hard
plastics and aluminum.

3180

45-R52-228/328

Royce//Ayr - R52-228/328 Upcut Spiral 2 Flute

General purpose router for solid wood, wood composites and some plastics. Upcut spiral gives good chip evacuation

2607

45-R52-234

Royce//Ayr - 2 flute "Upcut" Ballnose

General purpose for solid wood and wood composites. Upcut spiral gives good chip evacuation. Ballnose design for profiling or carving applications.

3260

45-R54-011

Royce//Ayr - 4 Flute Downcut Spiral

Downcut spiral for hard plastics. 4 wings for smoother
finish than conventional tools.

3751

45-R55-313

Royce//Ayr - 4 Flute Upcut Fiberglass Router

4 wing upcut router good for routing fiberglass.

16675

45-R56-018

Royce/Ayr - 2 Flute Straight General

Suitable for routing solid wood, MDF and some plastics.

3585

45-R57-024

Royce//Ayr - R57-024/124 Downcut (Aluminium & plastique dur) 2 flutes

Good for routing hard plastics
and aluminum. End mill finish
for improved bottom finish in
pocketing.

3180

45-R57-222

Royce//Ayr - R57-222/322 Downcut Spiral 2 Flute

General purpose router for solid wood, wood composites and some plastics. Upcut spiral gives good chip evacuation.

2418

45-R59-010

Royce//Ayr - 3 Flute Downcut Spiral

Good for routing hard plastics
and finish passes on solid woods.

3751

45-R60-016

Royce//Ayr - Upcut Low Helix Ripper 3 fl

Serrated tooth design to eliminate tear out in difficult wood grains. Tooth design greatly reduces horsepower required to cut. Upcut to assist with chip evacuation.

10555

45-R60-017

Royce//Ayr - R60-017 Upcut High Helix Ripper 3 Flute

Serrated tooth design to eliminate tear out in difficult wood grains. Tooth design greatly reduces horsepower required to cut. Upcut to assist with chip evacuation.

9725

45-R60-114

Royce//Ayr - R60-114 Compression 2 Flutes

For routing laminated or veneered wood and wood composites when top and bottom finish is critical. Upward and downward shearing action prevents chipping of laminates.

Ultimax (UM): Unique coating was selected after extensive testing on multiple coatings. Minimizes friction, increases edge hardness, and has excellent adhesion.Provides exceptional tool life specifically on nested routing applications.

8075

45-R60-110

Royce//Ayr - R60-110 Compression Chipbreaker 2 Flute

For routing laminated or veneered wood and wood composites when top and bottom finish is critical. Upward and downward
shearing action prevents chipping of laminates. Chipbreakers help to prevent
furring or tearout of core on plywood.

12145

45-R60-120

Royce//Ayr - 2 Flutes Mortise Compression

Laminated or veneered wood and wood composites when top and bottom finish is critical. High quality carbide and unique flute geometry for ultimate tool life. Short upcut allows for chip free dados to be routed.

Ultimax: Unique tested and proven Ultimax coating to reduce friction and increase wear resistance for twice the tool life in cutting white melamine.

7818

45-R60-150

Royce//Ayr - R60-150 Compression Plywood 2 Flute

For routing laminated or
veneered plywoods when top
and bottom finish is critical. Ultimax: Unique tested and proven Ultimax coating to reduce friction and increase wear resistance for twice the tool life !

10696

45-R60-321

Royce//Ayr - R60-321 Upcut Chipbreaker Finisher 3 Flute

General purpose for solid wood and wood composites. Upcut spiral gives good chip evacuation. Chip breakers help with furring and tear out.

12520

45-R61-010

1 Flute “O” Style General Plastics

Generic router bit for both hard and soft plastics. Free cutting “O” flute design enables easy cutting.

3685